Thingiverse
Noctua 4020 using stock screws Wanhao Di3
by printingotb
7
Downloads
6
Likes
2
Makes
The stock fan is noisy and the bearings are wearing out quickly.
I changed the stock 4010 fan for a Noctua 4020 and I wanted to use the stock screws, so I printed spacers in PETG. They work well if you do not over-tighten the screws.
In order to reuse the stock screws, you need to drill out two holes to get the screw head through (only the outer holes). Use a 6mm drill to carefully drill out the two outer holes that the screws go in.
I also zip-tied the fan cable as in the picture
***Not
I changed the stock 4010 fan for a Noctua 4020 and I wanted to use the stock screws, so I printed spacers in PETG. They work well if you do not over-tighten the screws.
In order to reuse the stock screws, you need to drill out two holes to get the screw head through (only the outer holes). Use a 6mm drill to carefully drill out the two outer holes that the screws go in.
I also zip-tied the fan cable as in the picture
***Not
Sign in to leave a comment
Sign in