Logitech C270 Mount (Camera Thread)

This mount was designed for the Logitech C270 Webcam in order to thread onto an articulating arm, in this case to view a 3D print remotely.

After the file has printed, the large hole in the bottom will need a 1/4"-20 heat-set insert that is 0.5" long.

The printed hinge was attached to the camera with a M3 x 20 mm screw with a nylock nut on the other side keeping the camera from swinging in the hinge.

It can be mounted to a tripod or any standard camera mount. The magic articulating a