Viking Lantern Repro (GlowForge)

This is a viking style lantern pattern designed for use on the GlowForge. You can, of course, use another laser cutter. In addition to these cut pieces,

You will need:

1/4" Wood or MDF (I used ProofGrade Medium Draft Board)
1/4" Poplar Dowels, cut to six (6) 8" lengths and one (1) 8.5" length (1 set per lantern)
Brown Kraft Paper, cut 7.5"x13.5" (1 sheet per lantern)
Wood Glue
OIL BASED Polyurethane
2.75" LED Puck Lights (or other light source of your choosing)
Paint or Stain for th