Thingiverse
Hose adapter / connector for pool hose 32mm
by CumpyRules
223
Downloads
135
Likes
1
Makes
This is a pool hose adapter to connect two 32mm (1 1/4") to each other.
The hose connectors has the outside diameters at the widening of 31.75, so that it fits perfect on the pool hose. To attach the hose securely on the adapter, you need a hose clamp.
**Do not use materials that are not resistant to pool chemistry (such as chlorine) or water. PLA is not suitable.** I have printed in PETG.
Using a 100% Infill is needed.
The speed settings is depented by the used printer.
---------
The hose connectors has the outside diameters at the widening of 31.75, so that it fits perfect on the pool hose. To attach the hose securely on the adapter, you need a hose clamp.
**Do not use materials that are not resistant to pool chemistry (such as chlorine) or water. PLA is not suitable.** I have printed in PETG.
Using a 100% Infill is needed.
The speed settings is depented by the used printer.
---------
Sign in to leave a comment
Sign in