Duinotech TL4076 Z-Axis manual adjustment knob

z-axis manual adjustment knob to save your fingers ; )

MAKE SURE YOUR STEPPERS ARE DISABLED BEFORE MANUAL ADJUSTMENT!!!

i have added my g-codes which is set at
layer height: 0.1mm
line width: 0.4mm
wall thickness: 0.8mm ( 0.4mm x 2 )
top bottom solid layers: 8 ( 0.1mm x 8 = 0.8mm )
infill: 60% grid
print temperature: 210° C

which should work fine if you have fixed any z-axis wobble issues.