"S" Bend for 1/2 inch conduit

I needed an 1/2 inch conduit “S” bend for a particular project I was working on but I also needed it to be short and have the correct offset.

Offset: 22.6mm
Angle: 40 degrees
Run Length: 68mm
Overall length: 100mm
Finished weight: 20.1 grams

Note that the ‘straight’ sections on either end only 16mm long. Normal 1/2 conduit fittings have a depth of 22.5mm. The 1/2 PVC conduit outside diameter is supposed to be 21.33 mm. Because of the expansion/shrinkage of the printing process as well