Lap Timer (laser-cut)

This is a lap timer was designed for line following robotics competitions, and was used in the LVBots May 2018 line following competition. The download includes SLDPRT, STL, and DXF files. This lap timer uses an A-Star 32U4 Prime (with LCD) and a VL6180X Time-of-Flight Distance Sensor Carrier with Voltage Regulator. It is adjustable both horizontally and vertically and laser-cut from 1/8" (~3mm) acrylic. The design uses #2 screws, so you will need the following hardware:

* 9 × 3/8" #2 screw