Thingiverse
SteinMore DeltaMax
by Rotorbugjl
11
Downloads
9
Likes
0
Makes
This is my version of the following Thing:
https://www.thingiverse.com/thing:923830
You will need parts from the above. The Lower and Upper corners only.
Use 2020 for the uprights (1000mm long x 3 units). 2060 (400mm long 3 units) for the base and 2020 (400mm long 3 units) at the top.
The effector spacing between rods are 60mm. I used 10mm Neodymium magnetic balls glued to the effector and carriers.
Use the "M5 allen cap screw mounts" for a magnetic setup. I used m5 allencap screws
https://www.thingiverse.com/thing:923830
You will need parts from the above. The Lower and Upper corners only.
Use 2020 for the uprights (1000mm long x 3 units). 2060 (400mm long 3 units) for the base and 2020 (400mm long 3 units) at the top.
The effector spacing between rods are 60mm. I used 10mm Neodymium magnetic balls glued to the effector and carriers.
Use the "M5 allen cap screw mounts" for a magnetic setup. I used m5 allencap screws
Sign in to leave a comment
Sign in