Bearing Press for Igus Drylin Bearings

A bearing press to help with inserting Igus bearings into tight fitting bearing housings. Simply inset the bearings as far as you can into the housing, insert it into the press and crank it into position.

This was designed for RJ4JP-01-08 bearings but should also work with the RJMP-01-08 bearings. I had a M16 bolt lying around hence the massive bolt but it gives good results.

You will need the following:
1x M16 x 100mm Bolt
1x M16 Nut

Print the body with the nut trap facing up and the