50mm Spool Adapters for QiDi Tech 1 and Flash Forge

I modified the 50mmspool adapters in 571760 by adding a bulkhead at the mounting end, and putting a 10mm hole and 15mm hex recess for a M10 x 25mm bolt that screws directly into the rear of the printer's case. I also made extra quick clips and put one on before mounting the filament spool as a spacer, and one on the outside to retain the spool.
One of the best accessories I've made for my printer. Unscrewing and screwing the original QiDi Tech spool mounts was a pain.