Open RC F1 Remote

I design this remote control to control the Open RC F1.

For the moment, there is not yet the most important is the telecommunication module. I bring 3 models whose ranges vary from 80 m to 4 km!

List of non-printed parts:
- 1 Arduino Nano
    - 1 PS2 Joystick
    - 8 screws 8mm x 2.5mm
    - 8 nuts 2.5 mm
- 3x 3 mm Led (Ex.: green, yellow and red) for "low batt" signal car and remote
    - 1 rack with 6xAA batteries
    - Many jumpers cables