Thingiverse

29mm Motor Retainer

von wardy89

80 Downloads

41 Likes

3 Makes

29mm Motor Retainer for Model rocketry.

This has been designed for use with CTI (Cesaroni) motors. There are 3 different version of this retainer with different outer finishes.

The screw thread is: M36-2

The test retainers i were printed in PETG and have been successfully flown with 29mm 3 grain H motors with no damage.

Estes estes rocket estes rockets High power rocket high power rocketry mid power rocketry model rocket model rocketry rocket rocketry Rockets

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PETG

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

29mm Motor Retainer

Ähnliche Modelle

Zur Sammlung hinzufügen