Thingiverse
3/8" threaded hose connector
di Peterpan101
101
Download
70
Likes
0
Makes
A watervalve to hose connector.
The top is designed for a hose with a **12mm** INNER diameter.
The bottom of the connector is **3/8" ISO** pipe threaded.
*
The connector is **waterproof!**
*
Tested and working values:
Layerheights: **0.15** or **0.2** or **0.32** [mm].
Infill: **15** or **20** [%].
PLA temp: **200** [Celsius].
Bed temp: **58** [Celsius].
*
Supports are not needed.
*
The top is designed for a hose with a **12mm** INNER diameter.
The bottom of the connector is **3/8" ISO** pipe threaded.
*
The connector is **waterproof!**
*
Tested and working values:
Layerheights: **0.15** or **0.2** or **0.32** [mm].
Infill: **15** or **20** [%].
PLA temp: **200** [Celsius].
Bed temp: **58** [Celsius].
*
Supports are not needed.
*
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
