MakerWorld

2D Art

30 min dog keychain

by jeff · 2D Art

7 Downloads

2 Likes

5 Makes

Go to Model

its just a keychain of a dog prints good 30min

Category

2D Art

Source

MakerWorld

Published

10.06.2025

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for 30 min dog keychain?

Any FDM printer should handle 30 min dog keychain just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print 30 min dog keychain?

According to the design notes, 30 min dog keychain takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is 30 min dog keychain available in?

30 min dog keychain is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is 30 min dog keychain free to download?

Yes, 30 min dog keychain is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

30 min dog keychain

Similar Models

Add to Collection