Super Vat Wanhão D7

This is a printable Wanhão D7 printable vat.

I printed this with 3-4 perimeters, 0.2mm layer height, 50% infill out of PLA.
DO NOT USE ABS AS IT WILL MELT WITH REPEATED UV RESIN EXPOSURE.

For 6" piece of glass.Epoxy it in place and then add 65g Sylgard 184 PDMS. Make sure when you pour it that it's completely level!

And finish cut and glue the adesive fep buy here
https://catalog.cshyde.com/item/silicone-products/fep-tape-film-sheet/23-5s-3d-11-75x12


This is basead on this