Thingiverse
Nerf crossbolt pump action kit
by Zero-Blade
17
Downloads
8
Likes
0
Makes
Make your nerf crossbolt pump action!
This kit only fits if you've already removed the bow arms.
The slide part slides over the tac rail and is held in place with 2 small screws (I drilled 2 tiny holes in the blaster for these)
Slide the pumpgrip on and in the forward position, connect it to the crossbolt slide (the light grey bit on top) with some bolts and nuts and two strips of metal (I used L shaped aluminium of 15x15x1,5mm but that's pretty overkill, it's what I had lying around)
Th
This kit only fits if you've already removed the bow arms.
The slide part slides over the tac rail and is held in place with 2 small screws (I drilled 2 tiny holes in the blaster for these)
Slide the pumpgrip on and in the forward position, connect it to the crossbolt slide (the light grey bit on top) with some bolts and nuts and two strips of metal (I used L shaped aluminium of 15x15x1,5mm but that's pretty overkill, it's what I had lying around)
Th
Sign in to leave a comment
Sign in