Thingiverse
Repeating 8-shot coin crossbow
by Dysplaced
154
Downloads
114
Likes
0
Makes
https://youtu.be/FF_aFtmUEIk
Coin gun with 8-shot magazine. You can print the coins, but I recommend Eurocents, as they have more weight. Other coins may work, too.
It does not really hurt, but you can easily adjust the power in both directions by scaling the bow in the direction of firing in your slicer.
Apart from the printed parts you will need:
- 40 cm thread
- 4 screws: M3x8 or M3x10 or M3x12 (plastic screws recommended, machine screws may work, too)
- 1 weak spring: d = ~15mm, l
Coin gun with 8-shot magazine. You can print the coins, but I recommend Eurocents, as they have more weight. Other coins may work, too.
It does not really hurt, but you can easily adjust the power in both directions by scaling the bow in the direction of firing in your slicer.
Apart from the printed parts you will need:
- 40 cm thread
- 4 screws: M3x8 or M3x10 or M3x12 (plastic screws recommended, machine screws may work, too)
- 1 weak spring: d = ~15mm, l
Sign in to leave a comment
Sign in