Prusa MK2s-MMU Mosquito Hotend Extruder

This thing replaces the stock E3Dv6 hotend on a stock Prusa MK2s with the Multi-Material version 1 upgrade with Slice Engineering’s Mosquito hotend.This installation uses the existing mounts and 3mm hardware found on the Prusa MK2s-MMU. You will need to provide a short piece of PTFE tubing to complete the install as pictured.

PETG - 0.2 mm layer - 20% Infill
To get the 'HOT' and logo emphasis on the cover I used PrusaControl w/color change set at 29.2 mm

Notes:

It is highly recommended