ZMR 250 LowRider

There is an updated Version available here: https://www.thingiverse.com/thing:3327180

Use bottomplates and arms from an old and used ZMR250 frame. Wanted to have the open sides to have an easy access to the electronics. Wanted to build something to throw around without hassle.

Needs following screws:
M3 30mm: 14-16
M3 7mm: 4
M3 10mm: 2
M3 nyloc-nuts: 18
M3 nut-standard: 2

One Bottom-plate needs to be cut out in front of the arms, to place the camera.

I used an trusty old Runcam