Thingiverse
Coheed and Cambria Keywork Fidget Spinner
by Gul_Delox
17
Downloads
14
Likes
0
Makes
Designed in Fusion 360 for a friend who is a massive Coheed and Cambria fan.
Requires 4x 608 ZZ skateboard bearings.
Print 2 of the Center parts. They should snap together pretty tightly inside the central bearing. Put some glue on the tip of the first center peg before putting the second one in so that they don't rotate free of each other.
The tolerances are pretty tight, so I recommend printing in PETG and using a vice clamp to force the bearings into the spinner body. It shouldn't re
Requires 4x 608 ZZ skateboard bearings.
Print 2 of the Center parts. They should snap together pretty tightly inside the central bearing. Put some glue on the tip of the first center peg before putting the second one in so that they don't rotate free of each other.
The tolerances are pretty tight, so I recommend printing in PETG and using a vice clamp to force the bearings into the spinner body. It shouldn't re
Sign in to leave a comment
Sign in