Thingiverse
Amplified Shunt II for mA, µA and nA Current Measurements
by Enginethrust
4
Downloads
5
Likes
0
Makes
A device for measuring small currents.
Inspired by the opensourced 'µCurrent' from David L. Jones: https://www.eevblog.com/projects/ucurrent/
Advanced SMD soldering skills are required to build this project!
Hints:
Solder the switches in the right orientation (see video)
The capacitors C3, C4 and C5 are not populated
Make sure the current flow through the shunt is from + to -
Measure on the low side of the load (place the shunt between load and ground)
Use the tool with a low volta
Inspired by the opensourced 'µCurrent' from David L. Jones: https://www.eevblog.com/projects/ucurrent/
Advanced SMD soldering skills are required to build this project!
Hints:
Solder the switches in the right orientation (see video)
The capacitors C3, C4 and C5 are not populated
Make sure the current flow through the shunt is from + to -
Measure on the low side of the load (place the shunt between load and ground)
Use the tool with a low volta
Sign in to leave a comment
Sign in