Thingiverse
X5S Z support System
by DKDaigle
229
Downloads
116
Likes
0
Makes
Complete Rod, stepper, and Flat bed support system for stiffer Z setup.
To install you will need 24 - M4 x 10 screws and 24 M4 - 2020 T-Nuts, 4 - 8mm x 16mm or somthing simular for the two holes next to the lead screw to clamp it together to the flat plate in the middle.
I also suggest getting M3 x 45 screws to secure the z steppers. the factory lengths grabs but I cant imagine there is much holding it.
I printed these at .2 layers, 20% infill, and 3 wall layers and they are quite sol
To install you will need 24 - M4 x 10 screws and 24 M4 - 2020 T-Nuts, 4 - 8mm x 16mm or somthing simular for the two holes next to the lead screw to clamp it together to the flat plate in the middle.
I also suggest getting M3 x 45 screws to secure the z steppers. the factory lengths grabs but I cant imagine there is much holding it.
I printed these at .2 layers, 20% infill, and 3 wall layers and they are quite sol
Sign in to leave a comment
Sign in