Flsun Kossel Plexiglass Enclosure

This is the enclosure I designed for my Flsun delta printer
(or any other with 680mm vertical 2020 extrusions).

It uses 9 printed corners and three plexiglass panels, the front panel is hold with magnets.

Each corner is hold with 2 M5x30mm screws.
The two rear panels are hold with 24 M3x12mm screws.
The front panel is hold with 6 10mm x 3mm magnets.

Print: 3x corner back, 4x corner front, 1x corner front bottom R, 1x corner front bottom L.