BIBO Bed Level Jig (works for Replicator as well)

Yet another bed levelling jig.

This one has magnets to stick to the rails...
...and a setscrew to tighten the dial gauge.

Designed for BIBO2 touch, but works well with any printer having 8mm rail rods, 70mm appart (65-75 is ok, though)


TIP: Best accuracy is achieved when bed is heated to print temperature first


BOM:
M3 x 30mm screw
M3 nuts (x2)
10mm diam neodymium magnets (x2)
Dial gauge with 8mm rod (+/- 20€ on Amazon)