Thingiverse
Mattracks adapters for CC-01 and TRX-4 trucks
by ltlowe
217
Downloads
195
Likes
0
Makes
This is a set of hub adapters and anti-flip brackets to use RadioShack Mattracks on Tamiya CC-01 and Traxxas TRX-4 Trucks.
In addition to the models provided here, you need
- a set of Radio Shack Mattracks :-) These seem to be getting scarce, but still show up once in a while. I found mine in a clearance bin.)
- 4 m4x35 cap screws. I chose stainless.
- 4 m4x20x6 couplers. The actual diameter of the ones I used is 5.53mm flat to flat.
- permanent threadlocker. I used loctite 262.
In addition to the models provided here, you need
- a set of Radio Shack Mattracks :-) These seem to be getting scarce, but still show up once in a while. I found mine in a clearance bin.)
- 4 m4x35 cap screws. I chose stainless.
- 4 m4x20x6 couplers. The actual diameter of the ones I used is 5.53mm flat to flat.
- permanent threadlocker. I used loctite 262.
Sign in to leave a comment
Sign in