Openbuilds OX CNC router Belt Tensioner for M5 nut

The original design is awesome!!! But, the nut trap didn't work for me because I have M5 screws and it appears to have been made for M6 screws which didn't fit through the as printed.

I used the V2 versions of the files. I used two 12mm long M2.5 screws for the clamp and M5x45mm screws for the tension, which were longer than necessary, but the longest I had were M5x20mm, which were too short. M5x25mm would probably have worked but I didn't have them. I'd recommend buying M5x30mm if you hav