Hex Bolt Knob and Foot

This is a replacement knob and foot with a 3/8" x 3" hex bolt to replace a clamp that was missing from our 4 color silk screen printing press.

The hex head dia is 16.24 mm and the shaft is 9.25 mm wide.

Be sure to print with a strong filament like PLA+ (Pro) or PETG and at 100% infill.

To install the handle slide the handle on the bolt and seat the head of the bolt as close to the handle by hand. Then put a nut on the bolt and tighten it down so that it pulls the bolt head into the hand