Wire Cam

Simple passive wire cam setup
Works great with a gimbal.
Can be moved using a slope or a rope to pull on the wire cam...


Uses 3x 686ZZ bearing (6x13x5mm) and one standard 1/4 inch screw for the gimbal/camera mount.

Print 3x time the Puleys. (The middle one is optionnal)

Also included my solidworks files if someone wants to improve it...

For more details or similar project ideas, make sure to check out my web site at:
http://maximeayotte.wixsite.com/mypage/single-post/2018/10/22/