3030 Reverse Bowden

As I'm using the Hevo in a direct drive setup and didn't want to mount the spool on the frame, I needed a filament guide.
To have the extruder not pulling on the filament and possibly bend it, I came up with a reverse bowden.
This part incorporates an E3D Bowden adapter as I dont like these cheap PC4 M6 thingies.
Print with whatever material.

Parts needed:
- Reverse_bowden
- Clamp
- 2 x M3 Nut
- 2 x M5 Hammer Nut (B-Type in my case)
- 2 x M3x25 screw
- 2 x M5x10 screw