Blind Motor NEMA 17
by tom_20000
94
Downloads
50
Likes
0
Makes
I'll try upload some more detail ASAP but the idea followed having tried the original design but the weight of my blind (3m long, 2m drop) breaking the gearbox on the suggested steppers.
The item screws to the wall via the hole inside the bearing mount and uses a standard 608 bearing
The motor I used was - 17HS13-0404S
The screw through the worm wheel is a M4 x 50mm countersunk cap socket allen screw and M4 nylock
The cover is held on by M3 x 10mm screws
Motor is interference fit but
The item screws to the wall via the hole inside the bearing mount and uses a standard 608 bearing
The motor I used was - 17HS13-0404S
The screw through the worm wheel is a M4 x 50mm countersunk cap socket allen screw and M4 nylock
The cover is held on by M3 x 10mm screws
Motor is interference fit but
Sign in to leave a comment
Sign in