Thingiverse
PX1 battery adapter
by Greywind
8
Downloads
4
Likes
1
Makes
*Version 3 changes (5/11/2018):
- Added a notch at the base, the battery SR44 fit so tight that it's hard to get it out. A notch was added so replace SR44 battery is easier now. (Tested, works great).
- Added a bar on the top so the wire from the diode could be hangover there, this way you don't need to solder anymore. (Tested, works great on my Canonet QL17).
*Print setting: Fast (0.2mm), Support = Yes, Brim = Optional.
A battery adapter to fit SR44 battery to PX1 battery (mercury).
Th
- Added a notch at the base, the battery SR44 fit so tight that it's hard to get it out. A notch was added so replace SR44 battery is easier now. (Tested, works great).
- Added a bar on the top so the wire from the diode could be hangover there, this way you don't need to solder anymore. (Tested, works great on my Canonet QL17).
*Print setting: Fast (0.2mm), Support = Yes, Brim = Optional.
A battery adapter to fit SR44 battery to PX1 battery (mercury).
Th
Sign in to leave a comment
Sign in