Maxum 1900 sc (yr 2000) windshield profile end plug / cover

On my maxum 1900 sc speedboat (yr 2000) some of the windshield profile end plugs were missing in the middle where the window will open to give access to the bow area. I measured the remaining one and made a 3d model to print. Works fine.

sand/round the corners after printing a bit to make them less sharp to the touch.

I made some small ridges along the outside to allow it to clamp itself with it but it turns out the pla is too brittle for that to happen. It will crumble while tapping it in