Thingiverse
Dual color Filament Splitter
by Psyqjo
48
Downloads
38
Likes
0
Makes
It is still needed:
PTFE tube 4x2mm
3x dowel pins
3x tube connections M6
To cut the ptfe tube you need the 3d splitterptfecutterv3.stl and 3d splitterptfecuttertopv3.st.
Then insert the long PTFE tube through the printed 3d splitterptfecutterv3.stl and let it protrude at least 50mm on both sides. Use a sharp knife to cut open the tube protruding in the middle to create an open tube, see picture.
For the small tube, only one piece needs to be inserted into the cutter to get the opposite.
PTFE tube 4x2mm
3x dowel pins
3x tube connections M6
To cut the ptfe tube you need the 3d splitterptfecutterv3.stl and 3d splitterptfecuttertopv3.st.
Then insert the long PTFE tube through the printed 3d splitterptfecutterv3.stl and let it protrude at least 50mm on both sides. Use a sharp knife to cut open the tube protruding in the middle to create an open tube, see picture.
For the small tube, only one piece needs to be inserted into the cutter to get the opposite.
Sign in to leave a comment
Sign in