R/C Buggy V1/V2 Hex 12mm wheel adapter

This allows mounting standard 1/10 hex 12mm wheels. Use a longer m3 screw and a washer on the outside of the wheel as 1/10 wheels normally expect 4mm rods instead of 3mm.
Measure the hole depth first to avoid breaking the shafts, these are the ones I used
* Front M3 20mm
* Back M3 25mm

Front and rear are different because the front has 8.0mm depth and the back has 9.6mm depth plus the front wheel needs a slight offset to avoid hitting the steering bar.

This adapter will push the wheels