FT TINY TRAINER ESSENTIALS

12-9-18; I noticed this morning that the firewall is coming apart from the side wall of the power pod. This is due to layer separation. The solution is to lay the power pod tray bottom on the build plate instead of the firewall being on the build plate.

The link below are the wheels I used. I used 3mmX16mm machine screws for the axles. I used a 1/8" drill bit to ream out the axle holes in the wheels. I used a 7/64" drill bit to ream out the hubs on the landing gear, so that the 3mm screw woul