TBS Diamond Antenna Mod

***Make Sure Your Printer Is Tuned. The Measurements Are Spot On Per Alex's Direction. If You Have A Variance, Its On Your Printer Under/Over Extruding.***

Updated 2018-Dec 31:

1) Added 868 Model. This places the wire, 1-3/4" back from the trailing edge of the Diamond. Use a 12g wire, 6 1/8" Long.
2) Rounded some edges for Zanthor.
3) If you run your Diamond in the Vertical position, the stock Taranis antenna might interfere with this mod.


2018-Dec 30

Alex Greve's shared a