18650 cell holders 6x5 bottom and top.

Print with 3 or 4 top and bottom layers for strength. approx 8 hour print using 0.15 at 40% infill.
bed layer 0.3

Dove tail has a nice firm press fit (by hand), haven't tested the cell locators with a cell yet but it was draw up at a diameter of 18.4mm.

Use ABS for strength

There is a top and bottom half. The top half has a counter bore for SHCS bolts and the bottom half needs to be tapped to m5. if you wish to use bolts to hold them together.

Hope its helpful to someone. If you t