Balance lamp

I was inspired bij the Heng Balance Lamp by Zanwen Li on Instagram.
This was made of wood but I found no 3D-printed derative so I made one.
I made parts for little and bigger printers.

Print parts:
1. Small test parts to calibrate the slicer (with modeled supports).
2. Right part + cap (2x)
3. Quarter curve part + cap (4x) or half curve + cap (2x)
4. Mount (6x)
5. Magnet close and hole (2x)
6. Pin (6x)
7. Housing (1x)
Be aware that the modeled supports are sliced in your slicer (che