Z axis damper holder for Ender 3

Using raft is optional but recommended.

My print settings:

- Sliced with Ultimaker Cura 3.6
- Speed: 60 mm/s (first layer: 30 mm/s)
- Temp: 242/75 °C (PET-G)
- Top/bottom patterns: lines
- Support pattern: zig zag
- Raft: yes, 0.8 mm
- Infill: 100%

You will also need:

- 2 pcs M3x10 screws
- 2 pcs M4x10 screws
- 2 pcs M4 T-nut