Growmau5 Far Red Initiator Puck 45° Wallmount

45° Wallmount for the Growmau5 Far Red Initiator Puck, probably best printed in PETG/ABS or similar higher temperature yielding plastic as the puck can get quite warm. I have retrofitted my pucks with extra passive heatsinks on the back attached with thermal adhesive. The mounting holes are approximately 2mm, I drilled those out a bit and tapped them to 3mm thread then mounted some spare computer standoffs. You will need a 5x2.5x5.5mm Male Right Angle DC Power Plug to power the puck, I was pl