Goodson's Hobbies 1.9 Beadlock Wheel 04 - "Alpha H1"

This beadlock wheel is for 1.9 rc crawler and scaler tires. It uses a 12mm hex hub with 13.5mm of backspacing. I wanted to replicate the design of the Alpha Hutchinson H1 Humvee wheels.

I recommend flipping the "back" file 180 degrees to print on the flat surface and you'll have a beautiful print. Finish this wheel with 8x M2x8 screws, I recommend self tapping screws.

The center cap snaps in place and will print quite well with support. You will need to bend some wire to remove the center