Silicone damper feet - Vibration damper

Instructions:

1) Print without any support.
2) After printing, put the screw and tie the nut.
3) Fill the inside of the damper with silicone based sealant (Aquarium glue) and use a spatula or a knife to make the glue surface even.
4) Let the glue to set completely for a day
5) carefully peal the thin upper part of the damper to expose the glue.

Tip: using a little oil on the internal surface of the thin part before pouring the glue will help with detaching it.

I have tried seve