Thingiverse
Filament Splicer
by sinned6915
172
Downloads
93
Likes
0
Makes
Cutting guide, holding jig and forming dies for filament splicing.
Used ~25mm of oversize 1/4" PTFE tube, 1/16" ID. Drill out with #50 or #51 drill bit AFTER its all put together.
Drill bits in order of size-
Number 51 - 0.0670 inch
1,75 mm = 0.0689 inch
Number 50 - 0.0700 inch
McMaster-Carr Part Number 8547K17. (As of this writing, their catalog page is jacked up, they appear to be changing suppliers. Generic PTFE is just fine.
The tube outer surface is roughed up with
Used ~25mm of oversize 1/4" PTFE tube, 1/16" ID. Drill out with #50 or #51 drill bit AFTER its all put together.
Drill bits in order of size-
Number 51 - 0.0670 inch
1,75 mm = 0.0689 inch
Number 50 - 0.0700 inch
McMaster-Carr Part Number 8547K17. (As of this writing, their catalog page is jacked up, they appear to be changing suppliers. Generic PTFE is just fine.
The tube outer surface is roughed up with
Sign in to leave a comment
Sign in