UPGRADED Raise3D N2 - Quad Fan Upgrade [Mk2]

As you may notice there should be two free fan plugs on Raise3D N2 printers which can be used for the additional two fans. May require some gapping for the limit switch but I will update where necessary.

Print:

1no. Quad Fan Air Duct
4no. Fan Cover
Additionally Requires:

2no. 35mm Axial Fans
6no. M3 x 10mm Socket Head Screws (Duct to Extruder Housing)
2no. M3 x 16mm Socket Head Screws (Through Fan & Cover @ Corners)
6no. M3 x 20mm Socket Head Screws (Through Fan & Cover Everywhere