CR-10 Top of Frame Spool Mount

This is a remix of https://www.thingiverse.com/thing:2641586

I like the design but I was frustrated trying to put the nuts in the slot(it was too narrow) and would be hard to tighten as well. I dindn't want to get longer 3mm bolts and wanted to use the original CR-10 thumb screws(bolts).

You will need T-nuts and 5mm bolts(10mm long) for the larger holes. You will also need to get two small 3mm nuts to attache to the original Creality bolts that usually hold the spool holder to the control