Anycubic Kossel PSU Bracket and duct for 120mm fan

Print the duct.stl and Bracket.stl and either glue or weld the two parts together with a soldering iron. The bracket should be a press fit, but i have uploaded the solidworks files, if you need to modify the bracket or the duct.

You can connect the 120mm fan to the mainboard or use an external power supply.

Remember to make the 120mm fan pulls air OUT of the PSU, this way it turns the same direction as the PSU fan, just in case it turns on at some point.

Some wenting holes in the botto