Creality CR10S-Pro filament guide

I made my own filament guide, because other designs dont use a bearing or use a bearing but no 90° filament guide. For the upper part, you can stick in a small pice of a PTFE tube to lower the friction even more. I also glued the the bearing into the ring.

What u need:

1x 608 Bearing
2x Washer (16x8.4x1.6) DIN125
1x Screw (M8x25)

Info: The part which "clamps" on the housing of the existing filament run-out sensor is longer as on the pictures.