Thingiverse
RC FlightLine F8F-1 Bearcat Admiral Rx Mounting Platform
by rmikebaker
5
Downloads
3
Likes
0
Makes
A simple platform to mount the Admiral stabilization receiver in my FlightLine F8F-1 Bearcat RC airplane. Keeps it level and secure.
I cut out a bit of foam on each side and glued in a little square of 3/32" plywood that I pre-drilled to accept the mounting screws.
Works like a charm. Just secure the Rx with a velcro strap, and off you go!
NOTE: Printed with 1 perimeter and 2 top and bottom layers. You could lower the infill and be fine, but even at 100% infill, it doesn't add much
I cut out a bit of foam on each side and glued in a little square of 3/32" plywood that I pre-drilled to accept the mounting screws.
Works like a charm. Just secure the Rx with a velcro strap, and off you go!
NOTE: Printed with 1 perimeter and 2 top and bottom layers. You could lower the infill and be fine, but even at 100% infill, it doesn't add much
Sign in to leave a comment
Sign in