3D Freunde Mosfet Mount

This is an mosfet mount designed for the upgraded MOSFET from 3D FREUNDE:
https://www.amazon.de/3D-FREUNDE-Entlastung-Mainboards-Heizbetts/dp/B07769QPNZ/


It's designes with a hole pitch (centre-to-centre spacing) of 63*53mm. So other mosfets with the same pitch will work also.


I used it to mount the MOSFET to a groundplate next to the printer. Use 4x M3x5(or longer) screws with M3 nut to mount the mosfet to the holder.