Thingiverse
Universal Bowden Tube PTC Clip
by evilmakers
3
Downloads
6
Likes
0
Makes
This is a universal clip to put under your bowden tube quick release tab to keep the tube from slipping during retractions. It can be sized for any PTC connector.
To use:
-Import STL into your slicer.
-Scale the 'x' and 'y' axis to the diameter of the brass cylinder underneath the plastic release tab. (ie. if dia is 7.4mm then 'x' and 'y' scale would be set as 7.4%) (refer to photo)
-Scale the 'z' axis as the height between the bottom of the plastic release tab and the lower part of the br
To use:
-Import STL into your slicer.
-Scale the 'x' and 'y' axis to the diameter of the brass cylinder underneath the plastic release tab. (ie. if dia is 7.4mm then 'x' and 'y' scale would be set as 7.4%) (refer to photo)
-Scale the 'z' axis as the height between the bottom of the plastic release tab and the lower part of the br
Sign in to leave a comment
Sign in